Chemical Resistant Elastomers

Chemical Resistant Elastomers Made For Demanding Uses

DuPont chemical resistant elastomers and thermoplastics supply durable sealing and flexibility for demanding applications.

From elastomers used in auto engine seals that can withstand new, emission-reducing fuels to parts used in oil and gas down-hole applications, DuPont has answers for today’s toughest challenges. We back our materials with expert application development assistance that begins with a concept and continues through installation.

Specifying the Right Material

Specifying the chemical, heat resistance and other properties that match your product use and processing environment is critical. Both over- and under-specifying can be costly, and achieving “just right” results is a process of testing, analysis and consultation.

As a starting point, here is a quick list of DuPont chemical resistant elastomer and thermoplastic materials:

  • Kalrez® perfluoroelastomer parts: Resistance to over 1800 chemicals and temperatures to 327oC, available in both standard and custom parts.
  • Viton® fluoroelastomer: Excellent resistance to aggressive fuels and chemicals, continuous exposure to heat up to 200oC. Some excursions to higher temperatures may be possible.
  • Vamac® ethylene acrylic elastomer: Excellent flexibility, oil and chemical resistance, and heat resistance to 175oC. Vamac® Ultra HT AEM delivers continuous heat resistance up to 180°C, with peaks to 200°C.
  • Hytrel® thermoplastic polyester elastomer: Combines the resistance and flexibility of elastomers with the strength of plastics and processability of thermoplastics.
  • Neoprene elastomer: Cost-effective, with broad chemical resistance and high flexibility, similar to natural rubber.

Elastomers Product Map

Kalrez® Perfluoroelastomer Parts: Highest Chemical Resistance

For the most demanding applications, DuPont Kalrez® perfluoroelastomer (FFKM) parts have the best fluid resistance of any elastomer. Kalrez® parts and seals resist over 1,800 different chemicals, while providing high temperature stability of PTFE (327°C). These advanced properties bring unrivaled performance to seal integrity, helping to reduce maintenance and operating costs, and improving safety.

Kalrez® parts are typically used in chemical processing, semiconductor manufacturing, food and pharmaceutical processing, aerospace, and oil & gas. From jet engine lubricants and rocket propellants to down-hole oil environments of the oil industry, Kalrez® perfluoroelastomer parts have been demonstrated to withstand severe chemicals and conditions.

DuPont offers a number of different Kalrez® compounds, each formulated for optimal performance in conditions with various chemicals and temperatures.

Viton® Fluoroelastomer: Advanced Sealing Properties

DuPont Viton® is the most-specified fluoroelastomer (FKM), providing proven resistance to chemicals and extreme temperatures. And that can mean less seal failure and downtime for your operation.

In the automotive field, the latest generation of Viton® has demonstrated its capability to meet a new performance standard for today’s advanced fuel, powertrain and air management systems. Viton® can help provide improved system durability in extreme temperatures for fuels, oils, transmission fluids, and acid condensates. In tough oil and gas downhole applications, Viton® can help extend maintenance intervals.

Viton® has outstanding resistance to aliphatic, aromatic and halogenated hydrocarbons, acids, and animal and vegetable oils. Specialty grades of Viton® provide resistance to ketones, low-molecular-weight esters, and alcohols and nitro-containing compounds. Viton® manufacturing facilities are ISO 9000 and ISO/TS 16949 registered.

Vamac® AEM: Focused on Engine & Powertrain Uses

DuPont Vamac® ethylene acrylic elastomer (AEM) is widely used in applications where heat and chemical resistance, as well as rubber-like qualities, are needed. Widely used in the auto industry, it can help promote longevity in powertrain and air management systems, and help provide long-term durability under chemical exposure and heat.

End-products made with Vamac® have been demonstrated to provide excellent resistance to hot oils and hydrocarbon- or glycol-based lubricants, transmission and power- steering fluids. Low oil swell offerings are based on grade selection and compounding.

Since being introduced, the AEM family of Vamac® Ultra has been quickly adopted by the market for a step change improvement in processing and performance, providing excellent resistance to engine and transmission lubricants, or to acids from exhaust recirculation and closed crankcase ventilation systems. Higher viscosity Vamac® Ultra grades can allow the development of various compounds without the need for DOTG as part of the cure system.

The Vamac® product portfolio is well suited to address a broad range of needs for molding and extrusion applications, including reduced oil swell, and low or high temperatures.

Engine and transmission seals made with Vamac® have been shown to retain their sealing properties under pressure. Transmission lip seals made with Vamac® have been shown to maintain performance when subjected to pressure and heat — or cold.

Generally speaking, ethylene acrylic elastomers are resistant to weather, ozone, hydrocarbon lubricants and greases, and hydraulic fluids. They’re not selected for contact with aromatic hydrocarbons, esters, gasoline and ketones.

Hytrel®: A Versatile Elastomer/Thermoplastic Hybrid

DuPont Hytrel® thermoplastic polyester elastomer provides a spectrum of mechanical properties, as well as mid-range chemical resistance. Its strength is in its versatility, combining the flexibility of rubber with the strength of plastics and the processability of thermoplastics. If your project requires a material with strength and moderate chemical resistance, Hytrel® is an excellent choice.

Parts made with Hytrel® can flex in multiple directions, cycle after cycle, long after rubber would break. A prime example is the Constant Velocity Joint (CVJ) boot. This automotive component is constantly in use, it’s subject to an average of 150,000 miles of pounding and a range of temperatures — from winter lows to scorching summers.

Hytrel® is an excellent choice when innovative new designs require creation of unique parts, since it can be processed using many thermoplastic methods, including extrusion, injection molding and blow-molding.

Neoprene: Time-Tested, Broadly Applied

Neoprene polychloroprene (CR) was created by DuPont in 1931, and has over 80 years of proven performance. With its versatile track record, Neoprene has been used in thousands of applications — from adhesives to window gaskets.

Year after year, Neoprene is used in applications like CVJ boots, bridge pads and power transmission belts, confirming its ongoing value as a mid-range synthetic rubber. And it is still preferred for reliable, performance of seals and hoses with many harsh fluids.

Neoprene is resistant to moderate chemicals and acids, oils, fats and greases. But its performance will be compromised in the presence of strong oxidizing acids, esters, ketones, and chlorinated, aromatic and nitro hydrocarbons.